Official roll call, can’t buy!

2022-05-30 0 By

Recently, the State Administration for Market Regulation notified eyeglasses product spot check unqualified conditions of the designated production units involved in “Jia Liang Optics” “Ya Shi” “Haines Morris” “Dahong Optics” “Constant vision” “Kang Shi optics” “Venxi optics”……In 2021, the State Administration for Market Regulation organized a spot check on the quality of eyeglasses.The report of spot check is as follows: Basic information (1) General situation of spot check.This time, 702 batches of products produced by 702 enterprises were randomly checked, involving 4 kinds of eyeglasses products, such as presbyopia mirror, sunglasses, eyeglasses lens and eyeglasses frame.In the process of sampling inspection, it was found that 1 batch of sunglasses products were suspected of counterfeit, which had been handed over to the local market supervision department.A total of 702 batches of products produced by 702 enterprises were tested and 45 batches were found to be unqualified, with a detection rate of 6.4%.(2) Tracking spot checks.The follow-up spot check to the last spot check unqualified enterprises 29, not found unqualified.Analysis of spot check results (1) The rate of unqualified finding of old vision mirror was 6.6%.Presbyopic lens, commonly known as “presbyopic lens”, is a kind of optical product used to solve the problem of seeing objects at close range. It is mainly used by middle-aged and elderly people with presbyopia due to functional degradation.The spot check of 91 batches of products produced by 91 enterprises in 5 provinces (municipalities), found that 6 batches of products are unqualified, unqualified detection rate is 6.6%.The unqualified rate of the product in recent 3 times of national supervision and sampling inspection was 6.0%, 13.2% and 6.6% respectively.This spot check focuses on nine items such as the focus deviation of the spherical mirror, the focus deviation of the column mirror, the transmittance of visible light, the horizontal distance tolerance of the optical center, the horizontal tolerance of the optical center on one side, the vertical difference of the optical center, the top focal difference of the two lenses, and the assembly quality.The unqualified items include the focal deviation of the spherical mirror top, the focal deviation of the column mirror top, the horizontal tolerance of the optical center, and the horizontal tolerance of the single side of the optical center.According to the analysis of technical institutions, the main reasons for unqualified products are immature processing technology, low technical level of assembly personnel, lax quality control of enterprises and lack of necessary factory inspection.This time, 37 batches of products and 35 batches of products were randomly checked from manufacturing enterprises in Zhejiang province and Jiangsu Province, and the unqualified detection rates were 13.5% and 2.9%, respectively.(2) The detection rate of unqualified sunglasses was 9.1%.The spot check was conducted in the distribution field, with 209 batches of products produced by 209 enterprises in eight provinces (municipalities). One batch of products is suspected of being counterfeit and has been handed over to the local market supervision authorities.Of 209 batches of products from 209 enterprises inspected, 19 batches were found to be unqualified, with a detection rate of 9.1%.In recent 3 years, the unqualified rate of the product was 10.0%, 10.2% and 9.1% respectively.The random key on the lens material and surface quality, ball lens focal degree deviation, column top focal lens, the optical center of the deviation and prism, visible light transmittance of the deviation, light transmission ratio relative deviation, the sun ultraviolet transmittance, A band ultraviolet transmittance, color B band limit, traffic signal transmission ratio, 17 projects such as express transmittance has carried on the inspection.Nonconforming items include visible light transmittance, relative deviation of light transmittance, frame requirements (sweat corrosion resistance), lens material and surface quality, and solar UV-A transmittance.According to the analysis of the technical organization, the main reasons for the unqualified are the poor quality of the raw materials selected by the manufacturer, the lax quality control of the purchased lens, the insufficient precision of the manufacturing process, and the products can not meet the design requirements and standard requirements.This spot check mainly involved the manufacturing enterprises in Zhejiang, Guangdong and Fujian province, the industrial agglomeration area. 78 batches of products from Zhejiang province were randomly checked, and 9 batches of products were found to be unqualified, the unqualified detection rate was 11.5%.42 batches of products from Guangdong province were randomly checked, and 2 batches of products were found to be unqualified, with a detection rate of 4.8%.35 batches of products from Fujian province were randomly checked, and 3 batches of products were found to be unqualified, with the detection rate of unqualified being 8.6%.(3) The detection rate of unqualified glasses was 8.0%.The spot check of 174 batches of products produced by 174 enterprises in 8 provinces (cities), found that 14 batches of products are unqualified, unqualified discovery rate is 8.0%.In recent 3 years, the unqualified rate of the product was 12.1%, 10.3% and 8.0% respectively.The random key on the ball, column top lens focal lens focal degree deviation degree of deviation, column axis direction deviation, the optical center and prism degree deviation, material and surface quality and additional top coke, the size of the lens, datum of the deviation, wear-resisting performance, refractive index, thickness, thickness deviation dispersion coefficient, visible light transmittance, color changing state of visible light transmittance, photochromic response value, sun purple24 items such as external A band transmittance, solar ULTRAVIOLET B band transmittance, express transmittance, blue light performance, light irradiation resistance, flame retardant, impact resistance were tested.Nonconforming items include dispersion coefficient, reference point thickness, thickness deviation, lens size, visible transmittance, solar ULTRAVIOLET BAND A transmittance, solar ULTRAVIOLET band B transmittance, and express transmittance.According to the analysis of technical institutions, the main reasons for unqualified products are that enterprises do not understand the product standards or factory inspection is not in place, mismark product parameters, and use inferior materials or cheap technology to save the cost of lens coating.This time, we focused on sampling enterprises in jiangsu province and Zhejiang Province, with 86 batches and 48 batches of products respectively. The unqualified detection rates were 12.8% and 6.3%, respectively.(4) The rate of unqualified spectacles was 2.6%.The spot check of 228 batches of products produced by 228 enterprises in 7 provinces (municipalities), found that 6 batches of products are unqualified, unqualified detection rate of 2.6%.In recent 3 years, the unqualified rate of national supervision and sampling inspection was 16.3%, 2.8% and 2.6% respectively.This spot check focuses on the high-temperature dimensional stability, tensile performance, nose bridge deformation, lens clamping force, fatigue resistance, coating adhesion, sweat corrosion resistance, flame retardant and other 8 items were tested.Nonconforming items related to tensile performance, sweat corrosion resistance.According to the analysis of the technical organization, the main reason for the unqualified is that the welding materials used by the enterprise are of poor quality or the welding process is not up to standard, and the raw materials used are easy to corrosion or discoloration.This time, we focused on sampling enterprises in jiangsu province and Zhejiang Province, among which 127 batches and 69 batches of products were randomly checked. The unqualified detection rate was 3.1% and 2.9%, respectively.Relevant requirements for the problems found in the national supervision and sampling inspection of product quality, the market supervision bureau (department, committee) of all provinces, autonomous regions, municipalities directly under the central government and xinjiang production and construction corps shall do the following work :(1) strengthen the handling of the results of sampling inspection.In accordance with the Product Quality Law of the People’s Republic of China and the Interim Measures for the Administration of Supervision and Sampling Inspection of Product Quality, we shall handle the results of supervision and sampling inspection well.Seal up and detain the unqualified products according to law, order the enterprises selling the unqualified products to stop selling the same products, comprehensively clean up and dispose of the unqualified products in stock according to law;Order the manufacturer of the unqualified product to stop producing and selling the same product, clarify the rectification requirements, supervise and urge the implementation of the rectification measures, and organize the review in time.Those suspected of crimes shall be transferred to judicial organs in a timely manner.Enterprises seriously violating laws and trust-breaking shall be included in the list of seriously violating laws and trust-breaking enterprises for management according to law.The results shall be recorded in the E-CQS system and submitted to the general Administration.The administration will strengthen follow-up supervision, according to the situation of the local results of the treatment.(2) Carry out special quality control.For zhejiang province’s old look into a mirror, sunglasses, glasses lens products in jiangsu province, the corresponding province market regulators to conduct industrial concentration area, special quality, strengthen supervision and inspection of the key enterprises within their respective jurisdictions, the integrated use of a variety of means, keep quality supervision high-pressure situation, serious processing quality illegal behavior, to improve the quality level.3. We will urge the implementation of principal responsibilities.Local governments and relevant departments will be notified of the unqualified products in this spot check, and effective measures will be taken to urge enterprises to fulfill the main responsibility for product quality and safety in accordance with the law, guide enterprises to organize production in strict accordance with standards, and ensure product quality and safety.(4) Strengthening quality and technical assistance.Organize relevant industry organizations and technical institutions to help enterprises find out the reasons in depth, put forward improvement measures and solutions, and promote the improvement of industry quality level.Detailed list forward!Well known!State administration of chengdu release source | national market